How to Do Disk Cleanup to Make Your Computer Run Faster

Here’s a quick and simple guide on how to physically clean your computer and remove all the dirt that prevents your computer from properly cooling down.

Some of us learned the lesson the hard way: a computer needs to be cleaned regularly, and we discourage doing it with a leaf blower, no matter how satisfying it might seem to you.

Internal components need to remain dust-free to remain adequately cooled and to prevent a significant reduction in their lifespan. Peripherals, on the other hand, should be kept clean mostly for hygienic reasons.

This guide will be devoted to this: helping you keep your gaming setup clean and operational. But what do you use to clean your PC alienware aurora 2019? And more importantly, how can you clean it safely and properly?

We will answer this question and more below so keep reading!

The Computer Case

Cleaning a computer case is rather simple. You will only be using compressed air, any sort of cloth and brush, and a screwdriver to open the case. You may also need cotton swabs and some alcohol for case-mounted fans.

  1. Remove the left side panel by unscrewing the screws on the back. Some cases come with screws that include special rubber or plastic caps to allow the user to remove them by hand.
  2. The dirtiest parts of a case are usually at the top and bottom, as the majority of the dust will end up settling there. Use a cloth to wipe this dust away. If the bottom of the case has gathered up a significant amount of dust, you may want to use a vacuum cleaner.
  3. Getting dust out of the hard-to-reach places is easily achieved with the help of a can of compressed air. You can use it to blow dust out of the drive racks and fan grilles on either the front or the back.
  4. If your case is equipped with dust filters, you will want to clean those too. This can be easily done with a can of compressed air or a brush.
  5. If your case has fans mounted on it, the biggest problem will be getting rid of the dust stuck to the fan blades. You may need to remove the fans from the case if they are hard to reach. To clean them, simply dip a cotton swab in rub away!

The Hardware

In this section, we will take a look at how to clean a CPU, a GPU, and a power supply, along with everything else that’s inside your Google Pixelbook 12in computer case.

What You Will Need

Let’s quickly go over the tools that you’ll need to clean your PC thoroughly. These are as follows:

  • A screwdriver, used for cleaning but for removing individual components or disassembling the entire PC, if needed. Either a slot or a cross-slot screwdriver will be fine.
  • A can of compressed air is the best way to get built-up dust out of a heatsink and out of hard to reach places. It should not be shaken, and it should always be held in an upright position to prevent liquid air from escaping. If you want to clean your macbook 12in m7 PC without compressed air, that is doable, although it can be more tedious.
  • A soft brush will be used for getting the dust off of circuit boards and heatsinks.
  • Cotton swabs and rubbing alcohol will get rid of stubborn pockets of dust in tight spots.

The Cleaning Process

Now that you have all that you need let’s get to work!

First of all, you should unplug the power supply. It is essential that the PC is not powered and has had time to cool off before you start cleaning.

Cleaning the CPU

While the CPU itself doesn’t need cleaning, the cooler and the socket do. Here’s how you should do it:

  1. Disconnect the cooler from the motherboard and take it out of the case. Pushpins are the most common way of keeping a CPU cooler in place, but if you have a different one, be sure to check the manufacturer’s site or the guide on how to remove it properly.
  2. Hold the fan blades in place while you use the compressed air to blow out the dust from the heatsink. The high air pressure forcing the fan to spin might damage the bearing.
  3. Brush out remaining dust from the fan itself.
  4. Use the cotton swabs and alcohol to get rid of any dust that stuck to the fan blades.

After this, use the brush to clean out the dust on and around the socket before putting the cooler back. You don’t need to remove the CPU to do this.

Cleaning the Graphics Card

Cleaning your graphics card is even simpler than cleaning the CPU. You can do it without actually having to remove the card from the case, but we recommend doing so if you want to clean it thoroughly.

If you want to remove the card from the case:

  1. Remove the safety screws on the case and pull the card out with both hands. Also, make sure that the PCIe slot’s safety bracket is not holding the card in place.
  2. As before, hold the fan(s) to prevent them from spinning while you blow out the dust with the compressed air can. If it is a graphics card with a blower fan, it is best to blow the air through the back of the card.
  3. Use the brush to clean the backplate. If you have a card without a backplate, be sure to brush gently so as not to damage the circuit board.
  4. Once again, use the cotton swabs and rubbing alcohol to remove the remaining dust from the fan blades.

On the other hand, if you don’t want to remove the graphics card from its slot, simply use the compressed air can to blow air into the back of the card and watch the built-up dust from inside the heatsink fly right out. When doing this, make sure that the can remains in an upright position so that no liquid air escapes, as it may damage the graphics card.

Cleaning the Power Supply

The PSU can be cleaned with or without removing it from the case, and also with or without opening it.

Removing the PSU:

  1. Disconnect all the power connectors from other components. When disconnecting connectors, make sure that they are not held in place by a safety pin. If you’re having trouble getting the connector to come loose, try wiggling it gently left and right while holding the motherboard down.
  2. Remove the safety screws and take the PSU out of the case.

Cleaning the PSU without opening it:

  1. Push the screwdriver through the fan grille to prevent the fan from spinning.
  2. Use the compressed air can to blow out the dust.
  3. Make sure to do so from different angles several times to ensure that no dust remains trapped inside.

Opening and cleaning the PSU:

  1. Remove the screws holding the PSU cover in place and remove it.
  2. Use the brush or compressed air can to get rid of the dust built up inside.
  3. Use cotton swabs with alcohol to get rid of the dust on the fan blades and in any hard-to-reach places.

Cleaning the Motherboard

The motherboard itself doesn’t need much cleaning since its usually vertical positioning prevents the dust from building up anywhere but on top of the heatsinks, as well as on top of the protruding PCIe and RAM slots, as well as on top of the rear panel ports. As such, if your motherboard is positioned vertically, and all you need to do is a bit of light brushing.

If your motherboard is positioned horizontally, then dust is likely to have built up inside some of the unused PCIe and RAM slots. In this case, you only need the brush once again. Gently brush the ports to get the dust out. You may also use compressed air or blow the air out yourself, but this is hardly ever necessary.

Other Components

As for the other components:

  • HDD/SSD – Neither hard-disk drives nor solid-state drives need internal airflow to remain cool, so all that you need to do is brush away any dust that has gathered on them.
  • RAM modules – Once again, RAM doesn’t have any active cooling apart from the heatsink, which is easy to clean with just a brush.
  • PCIe expansion cards – If you have a sound card, a network card, or any other type of PCIe expansion card, they can also be cleaned easily with just a brush. In the unlikely case that it is a large card with an active fan, you can clean it the same way as you did the graphics card.

Leave a Reply

Your email address will not be published.